How to use PE1
1.  To read a pattern on design card. Ex. 50 rows/38 sts 2.  To knit using PE1 or to confirm a pattern 3. To format a Memory Card or to erase all patterns

Read

F4

(Inspection Switch ON)

(Set design card)

(Inspection Switch OFF)

*Always set the pattern width indicator to 60 when using PE1

Knit

*You can change between the pattern and the row number by pressing key

Save

F1

Set Memory Card

To abandon the erase, press key here
*Use key if.....
1. You make a mistake. (You can delete the last entry, 1 character at a time.)
2. You want to stop PE1 from reading a pattern.
3.  PE1 doesn't work whatever key you press.
4.  Display doesn't show OK sign when you want to READ, KNIT, SAVE or   LOAD
*The pattern read into PE1 is not erased by pressing key.

 

 

 

4. To store a pattern into a Memory Card. 5. To recall a pattern from a Memory Card.          Ex. To recall 8th pattern. 6. To see how many patterns are in Memory Card.

Save

Set Memory Card

*Display shows the reference number of the stored pattern.

Load

Set Memory Card

*Display shows the numbers of rows and stitches of the recalled pattern.

Load

F1

Set Memory Card

*Display shows the number of stored patterns.

 

 

 

 

 

 

 

 

 

 

 

 

 

7. To erase the last pattern stored in Memory Card. 8. To copy all patterns from Memory Card to another Memory Card. 9. To copy one pattern from Memory Card to another Memory Card. Card A to Card B

Save

F2

Set Memory Card

To abandon the erase, press key here.

Load

Save

Set Master Memory Card (with patterns)

Set Memory Card

Load

(Pattern No.)

Set Memory Card (Card A)

*Display shows the numbers of rows and stitches of the recalled pattern.

Save

Set Memory Card (Card B)

*Display shows the reference number of the stored pattern.

 

 

10. To combine patterns from  design card and Memory Card 11. To combine patterns from Memory Card. 12. To read for Multi-Colored Jacquard. Ex 72 rows/60 sts.  3 coloured Jacquard.

* Read the pattern on design card (Refer to No. 1)

Load

F2

(Pattern No.)

Set Memory Card

* Display shows the numbers of rows and stitches of the recalled pattern

* Recall the pattern from Memory Card.

(Refer to No. 5)

Load

F2

(Pattern No.)

Set Memory Card

* Display shows the numbers of rows and stitches of the recalled pattern

Read

F4

F3

(The number of colors to be used in one row.)

(Inspection Switch ON)

(Set design card for color A.)

(Inspection Switch OFF.)

* When the display shows "OK" sign, repeat from for color B and C
*When combining more than three patterns, repeat from

*Make sure that the patterns to be combined always must be the same width.

 *When working Multi-Colored Jaquard, always set Cam Leaver to Slip and put the left light ON of pattern Switch No. 1.