Roni Knutson's

Studio/Silver Reed/Knitmaster Accessories List, by number - updated September 2, 2014

Please note that for a numbers of years, Silver Reed machines, ribbers and accessories were imported into Canada under the "Singer" name as well as Studio.

Model # Description Gauge Applicable to
AW1 Auto Weaving Arm 3.6*/4.5 All 3.6* & 4.5 machines (326 and newer)(also fits the 324)
EC1 Electronic Controller - pattern   SK830,840,860,890
GB Garter bar (35210046) 4.5 All 4.5 mm machines
HW1 Weaving Arm  9.00 SK150,151
LC1 Lace carriage  4.5 SK360
LW1 Weaving Attachment   LK100,140,150
PE1 Design Controller - extender -electronic   SK580,830,840,860,890
RJ1 Ribber carriage, bird's eye jacquard 4.5  SRP20/50/60/60N
01027036 Ribber carriage, bird's eye jacquard 3.6 3.6 ribber
RT1 Rib Transfer Carriage 4.5  SRP20/50/60/60N
SC1 Linker (cast off) 4.5 SK321-4/326-9,SK500
YC1 Yarn changer - double bed 4.5  Fits older standard (4.5) machines
LC2 Lace Carriage 4.5  SK210, 260, 280, 360, 600, 700, 740
YC2 Yarn changer - double bed 4.5 Fit older standard (4.5) machines
KR3 Knit contour/radar 4.5 Fit older standard (4.5) machines
SC3 Linker  4.5 SK210, 260, 280, 360, 560, 580, 600, 700, 740, 840
SHW3 Wool winder   all machines
YC3 Yarn changer - double bed  4.5 Fit older standard (4.5) machines
YC5 Yarn Changer - double bed  4.5 SK321-4, 326-9, 500, 560, 580, 260, 280, 360, 700, 740, 270, 370
GB6 Garter bar  6.5 All 6.5 mm knitting machines
FC6 Fairisle carriage plus automatic cast-on 6.5 LK 150
KR5 Knit contour/radar   Please e-mail me if you have info on KR5
KR6 Knit contour/radar - half scale   All steel beds without contours
LS6 Pattern Selector  6.5 LK140/150
YC6 Yarn Changer - single and double bed  3.6*/4.5 All 3.6* and 4.5 machines
KR7 Knit Contour/radar - half and full scale (wide)   All steel beds without contours
SC7 Linker  6.0 MK70
GB9 Garter bar 9.0  SK150, 151, 155, 890, LK100
AG10 Intarsia Carriage   LK100, 140, 150
KR10 Knit Contour - elect. - 1/2 or 1/4 scale   All current knitting machines
PC10 Pattern Programming Device (combination of EC1 and PE1 updated) LCD display   SK830, 840, 860, 890 (electronic machines)
SHW10 Cone winder (sep.plastic cones)   All machines
KR11 Knit Contour - elect. - 1/2 or 1/4 scale   All current knitting machines *
AG20 Intarsia Carriage 3.6*/4.5 Parts exchange req. for SK830 and FK270/370
KR21 Knit Contour - elec - 1/2 or 1/4 scale (not usable with SK700 and SK740)   SK830, 840, 860, 890, 580, 160, LK150, LK140 *
AG24 Intarsia Carriage  4.5 All 4.5 knitting machines
AG30 Intarsia Carriage  9.00 SK155, 890
AG40 Intarsia Carriage 6.5  SK860
AG50 Intarsia carriage - electronic 4.5  SK580, 840
PS150 Pattern selector 9.0  SK150, 151
AG155 Metal intarsia & plating carriage for chunky 9.0  SK155, 860, 890
LC260/360 Lace carriage for standard 4.5 SK260, 280, 360, 700 & 740
SA300 Motor drive   Fit fine, standard, mid-gauge and chunky
SA310 Motor drive   SK151, 155, 210, 270, 580, 830, 840, 890
FLC270
FLC370
Lace carriage for fine knitters (3.6) 3.6 FK270/370
LC560 Lace carriage/electronic  4.5 SK560
LC580 Lace carriage/electronic 4.5  SK580, 840, 830*
KC860 Upgrade carriage 6.5 SK160, SK860
DL1000 Linking machine all For joining garments
* AW-1 may be used on the 3.6 mm machines only if the fabric gears on the carriage arm are changed.

* YC6 may be used double bed on the 3.6 machine; single bed only if the fabric gears on the carriage arm are changed.

*Special row counter is required for KR11 use with some machines (RC - 15L with the LK100/140 and RC -15K with the SK155/151/280/270)

*LC580 lace carriage can be adapted to work on the SK830 with changes to the gears and adapting of the timing of the electronics. Silver Knitting in England has confirmed this. (with thanks to Anne-Grethe for this information)

* KR21 can be used with other knitting machines with the RC15K optional row counter.

I have made every effort to ensure that the information on this page is correct. If you notice any errors or ommissions please Contact Me

© rvk 1999 - 2008

Home